Products
Are you here:Home >

Customized Waterproof silicone Self Fusing Tape for Electrical Application

• Excellent heat, chemical and moisture resistance • Full cure is achieved in 24 hours • Tear and abrasion resistant • Non-flammable • UV resistant
  • Detailed

Description

Self-fusing Silicone Tape is a convenient, ready to use tape which can be used to make airtight and waterproof seals on many types of materials and applications including electrical connections, hoses, and cables and to reduce vibration of hand tools. It is tear, abrasion, and UV resistant and it withstands exposure to fuel, water, oil, acids, and many solvents. It is a class H Insulator. This product is designed to seal hoses and leaky plumbing, insulate electrical connections, wrap hand tool handles.


Features

l   Standard colors: red, yellow, green, black (other colors can be customized)

l   Operating Temperature: -60~+180

l   The surface of the tape is not sticky to the touch, after peeling off, no sticky residue will be left

l   Strong self-adhesiveness can be produced in a short time, and it can be self-integrated after winding, which can be sealed and waterproof

l   The product can be wound into any shape, suitable for wrapping various electrical cable joints and intermediate joints

l  Anti-fouling, anti-corrosion, anti-ultraviolet, waterproof, ozone-resistant, anti-aging, suitable for various environments, suitable for outdoor operations


Technical Performance

Item

Typical Data

Test Standard

Tensile Strength

3.5MPa

GB/T 528-2009

Elongation at break

200%

GB/T 528-2009

Self-adhesive

3.5N/cm

ASTM D2148

Flame retardancy

V-0

UL94

Dielectric strength

22kV/mm

GB/T1408.1-2006

Volume resistivity

1.3×1014Ω·m

GB/T1410-2006

Water absorption

0.9%

GB/T 1034-2008

 

Dimension

Size

Widthmm

Thicknessmm

PackageM/Roll

20*0.8

20

0.8

5/customized

25*0.5

25

0.5

5/customized

25*0.8

25

0.8

5/customized

25*1.0

25

1.0

5/customized

30*1.5

30

1.5

5/customized

50*0.5

50

0.5

5/customized

50*0.8

50

0.8

5/customized

50*1.0

50

1.0

5/customized

80*0.8

80

0.8

5/customized

100*0.5

100

0.5

5/customized

100*0.8

100

0.8

5/customized

                                                                 Note: special size and packaging can be customized upon request

 

Instructions

l   Wipe the surface of the object to be protected, tear off the isolation film, and wrap half of the self-adhesive tape on the object to be protected

l   Finish installation

Precautions

l   Before installation, the surface of the object to be protected must be cleaned, free from dirt and debris, so as not to affect the installation and use

l   When tearing off the film and attaching it to the protected object, a small amount of tearing off the film is required. Too much film tearing at one time will cause wrinkles and stick to impurities during use, which will affect the use

l   When pasting, one-half overlap is required to ensure the protective effect of the product

l   The environment should be kept as clean as possible during use to prevent impurities from sticking to the tape and affecting the adhesive force



More>>Contact Uscontact

Consult online

Wechat+86 13776247502
Wechat+86 18963667177
Tel:86-18963667177